You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets. - Stack Height: 40mm - Weight: 180g
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
$15.99 - $16.99
• Forged aluminum • Single-bolt clamp • 180mm tall
• Aluminum head • Stainless-steel 180mm-tall shaft • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • Single-bolt clamp
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
$99.99 - $104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style. - 3D forged and CNC machined from AL6061/T9 - 4-bolt cold forged front clamp - 40mm clamp stack height - Weight: 149g
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
Ritchey's WCS C260 stem starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware, and stem body. The steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. The body is 3D-forged from an advanced 7050 aluminum and internally machined for further weight reduction. Premium quality chromoly steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity. - Stack Height: 42mm - Faceplate width: 36mm - Weight: 103g (100mm)
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Broc Raiford's signature RAFT stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
• Forged aluminum • 2-bolt clamp • 180mm tall
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.
The Koryak Di2 stem is ideal for AM, Trail, and XC. It's 3D forged with AL-7075 aluminum for a strong and lightweight stem, and has a headlock system for a secure front clamp fixation. The Koryak stem is ready to hit the trail.